J-16 Pavement Sealer

CONCENTRATED
A Rubberized Geotextile and Polymer Fortified Coal Tar Emulsion

  • Concentrated formula for contractors
  • Widely specified by architects, engineers and large property owners.

    Sold in concentrate form and delivered in bulk tankers, and in 55 gallon drums.
    Call, fax, or email for bulk or drum prices. Contact us for available distributorship.

  • SKU: J16-Pave Category:

    Description

    ADVANCED FORMULA J-16 PAVEMENT SEALER cures to form a tough, slate black barrier that is highly resistant to the elements. Plymer fortified for superior wear resistance and bonding. Geotextile fibers allow greater flexibility. Linear strength is improved and fine cracks are filled better. Additives are not needed which saves time and money. ADVANCED FORMULA J-16 PAVEMENT SEALER meets and exceeds Federal Specification RP 355(e).

    Application

    Application: Apply ADVANCED FORMULA J-16 PAVEMENT SEALER with long handled heavy duty soft rubber squeegees, plastic bristled brushes, or self propelled mechanical or spray applicators especially designed for this purpose. Apply in two (2) coats. Mix silica sand with J-16 for added wearability and slip resistance. The quantity of materials required will vary with the porosity and texture of the pavement surface, its use and the equipment used for application.

    Coverage

    Coverage: Quantities required will vary with porosity and texture of pavement surface, but general ranges are as follows:

    TYPE OF AREA SEALER GRADE GALLONS NEEDED
    LOW TRAFFIC
    Home Driveways
    Play Areas
    Parking Stalls
    Bicycle and Golf Car Paths Etc.
    1st COAT J-16
    Plain or Sand Filled
    .10-.15 gal per sq yd
    2nd COAT J-16 Plain .08-.10 gal per sq yd
    MODERATE TRAFFIC
    Driveways
    Parking Lots
    Airfield and Highway Shoulders
    Service Station Aprons
    Steep Grades
    1st COAT J-16
    Plain or Sand Filled
    .10-.12 gal per sq yd
    2nd COAT J-16 Plain .08-.12 gal per sq yd